Skip to content
Texas · Cochran County

Water wells in Cochran County, Texas.

The median water well in Cochran County, Texas is 225 feet deep, based on 2,098 driller's reports filed with the Texas Water Development Board since 2001. Half the wells on record are between 175 and 273 feet, and the deepest is 530 feet. These are borehole depths, not depth to water.

All Texas counties · Source: Texas Water Development Board, Submitted Drillers Reports (TDLR/TWDB well report index). Read 2026-09-07.

What the filed reports say.

Every water well drilled in Cochran County since 2001 is meant to be filed with the state by the driller. These are those reports, counted.

  • Median

    225 ft

    The middle of 2,098 water wells with a reported borehole depth. Half were drilled shallower, half deeper.

  • Typical range

    175–273 ft

    The spread is narrow. Eighty per cent of the wells on record finish between 175 and 273 ft, so the county's ground is comparatively consistent — though consistency across a county is not a promise about one parcel.

  • Deepest on record

    530 ft

    One well. A single deep hole says what the county can demand, not what it usually does.

  • Reports on file

    2,098

    Water-supply wells — domestic, irrigation, stock, public supply — carrying a borehole depth. The county has 2,210 filed reports in total; the rest are monitoring wells, soil borings, test holes and injection wells, which are not water wells and are not counted here.

  • Water quality

    0.0% flagged

    1 of 2,001 reports that answered the question flagged injurious water quality. It is the driller's own judgement at the time of drilling, not a lab result, and it is not a map of where bad water is.

How the record moved.

The middle of the record has barely moved: 218 ft in 2001–2009, 235 ft in 2020 onward. Drillers in Cochran County are finishing at about the depth they were finishing at twenty years ago.

2001–2009
292 wells, median 218 ft.
2010–2019
641 wells, median 217 ft.
2020 onward
1,165 wells, median 235 ft.

What this page cannot tell you.

The state's report index carries some things and not others, and the difference decides what any honest page built on it may say.

  • Not the depth to water.

    Every depth here is how far the hole went, which is deeper — often much deeper — than the level water stands at. The report index does not carry a water level at all; those readings live in the state's groundwater database and its nightly archive, and reach a report from there.

  • Not a yield.

    Where a driller tested a well and wrote down what it made, that is on record elsewhere. It is not in this index, so no number on this page is a gallons-per-minute figure and none should be read as one.

  • Not a prediction for your parcel.

    A county median is a description of 2,098 holes spread across the whole county. The wells that matter for one property are the nearest ones in the most similar ground, which is a different question and the one the check below answers.

  • Not every well.

    Wells drilled before the reporting era, wells never filed, and wells filed with the wrong location are all missing or misplaced. The index is what was submitted, not a census of what exists.

Questions about Cochran County wells.

How deep are water wells in Cochran County, Texas?
The median water well in Cochran County, Texas is 225 feet deep, based on 2,098 driller's reports filed with the Texas Water Development Board since 2001. Half the wells on record are between 175 and 273 feet, and the deepest is 530 feet. These are borehole depths, not depth to water.
How much does it cost to drill a well in Cochran County?
Nobody can quote a Texas well from public records, because the record holds depth and not price. What the record does fix is the part of the price that depends on depth: at a median of 225 ft, with eighty per cent of wells between 175 and 273 ft, a quote built on a much shallower hole than the neighbours drilled is a quote to ask about. Drillers price per foot, plus casing, plus the pump.
Is there a well on a property in Cochran County?
The filed reports show wells near an address, not on it — a Texas driller's report often carries the nearest road rather than a surveyed point, so a well can be filed under a neighbour's address or not filed at all. The record raises the question and the seller answers it. A free water check on Texas Water Report draws the parcel and lists the wells around it with their distances, which is the version of this question a record can answer.
Are wells in Cochran County deeper than the rest of Texas?
Shallower. The county's median is 225 ft against a middle-county median of about 275 ft across the 176 Texas counties with enough reports to compare. A shallower county usually means a cheaper well, though shallow water is also the water most exposed to a dry year.
Are wells in Cochran County getting deeper?
Not measurably. The median was 218 ft in 2001–2009 and 235 ft in 2020 onward. The filed record does not show the county drilling deeper over time.
What are wells in Cochran County drilled for?
Mostly irrigation — 94% of the water-supply reports on file. The rest are split between the other uses the state records: domestic (79), stock (49), public supply (1).

Counties next door.

The ground does not stop at a county line, and neither does the record worth reading.

  • Texas water due diligence

    What the public record holds about groundwater under a property, and the questions to settle before closing.

  • For drillers

    The same records, read for the rig: what the neighbours hit and how far the hole is likely to go.

  • Every Texas county

    Well counts and median depths for all 176 counties with enough reports to compare.

Check an address in Cochran County.

The county median is the middle of the whole county. A check draws the parcel, finds the wells actually around it, and gives the depth band those wells support — free, without an account.

Free. No account. Texas only.